Summary

This position serves as a General Engineer who supports the operation of the health care facilities within the Pine Ridge Service Unit Facilities Department in Pine Ridge, SD. The incumbent coordinates planning, project development, construction and equipping of new and existing facilities being built, renovated and repaired. The position reports to the Supervisory General Engineer.

Duties

• Coordinates the implementation of a Computer-Aided Design program.
• Initiates drawings, specifications, on routine and moderately complex projects.
• Reviews testing or observational data and develops and advises on the scope of operation, modification, and repair of facilities.
• Visits service unit sites to obtain specified information on condition of existing structures.
• Develops engineering proposals, designs and statements of work for facilities to be modified or repaired.
• Provides engineering oversight of facility repair and/or construction projects and serves as Contract Officer's Representative for assigned contracts.

Requirements

Conditions of Employment

Selectee may be subject to a probationary period
U.S. Citizenship is required
Selective Service Registration is required for males born after 12/31/1959

Measles and Rubella immunization required for selectees born after 1957 and seasonal influenza immunization is required for all staff working in Indian Health Service health care facilities.

COVID-19 vaccination is required for all selectees prior to entrance on duty.

Successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit .

Background Investigation: If you are selected for this vacancy, you must undergo a pre-employment fingerprint check and background investigation. Fingerprint results and background investigation documentation must be cleared prior to hire. After you begin your employment, your continued employment is contingent upon the outcome of a complete background investigation as determined by the sensitivity level of your position. The investigation must find that you are suitable for Federal employment in your position. If you are found not suitable, you will be terminated after you begin work. If you make a false statement in any part of your application, you may not be hired; you may be fired after you begin work; or subject to possible criminal charges. You may be subject to a credit check as a part of the background investigation process.

Qualifications

To qualify for this position, your resume must state sufficient experience and/or education, to perform the duties of the specific position for which you are applying.

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; social). You will receive credit for all qualifying experience, including volunteer and part time experience. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.

BASIC REQUIREMENT(S):

A. Degree: Engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. A combination of education and experience: -- college-level education, training, and/or technical experience as evidenced by one of the following:

1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A above.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)

Applicants who meet the Basic Requirements described above are qualified for the GS-05.

In addition to the Basic Requirements, you must also meet the Minimum Qualifications stated below for the grade levels identified.

MINIMUM QUALIFICATIONS:

GS-07: One year of specialized experience performing the following type of work: knowledge of engineering principles, methods, and techniques; knowledge of energy conservation and computer maintenance management systems; skill in design and construction activities for healthcare facilities.
Or a bachelor's degree in an engineering program with Superior Academic Achievement.*
Or completion of at least one full year of graduate level education in engineering or a related field.
Or a bachelor's degree in engineering AND 12 months' work experience as a technician equivalent to the GS-5 grade level or higher.
Or completion of a 5-year program of study of at least 160 semester hours leading to a bachelor's degree in engineering.

GS-09: One year of specialized experience performing the following type of work: experience directly related to standard engineering practices, methods, and techniques to perform design work applicable to the design, construction, maintenance and repair of healthcare facilities; developing reports, engineering statements of work for facilities to be modified or repaired; and performing engineering duties concerned with the design, repair, and buildings and HVAC controls, utilities and related systems.
Or a master's degree in engineering or a related field or equivalent graduate degree or 2 full years of progressively higher level graduate education leading to a master's degree in engineering or a related field.
Or a Bachelor's degree in an engineering program with Superior Academic Achievement* AND 1 year of appropriate professional experience.
Or completion of a 5-year program of study of at least 160 semester hours leading to a bachelor's degree in engineering AND 1 year of appropriate professional experience.
Or a combination of graduate level education in engineering or a related field AND specialized experience that meets 100% of the qualification requirements for this position. Qualifying graduate education must be in excess of 18 semester hours.

*One of the following three needs to be met for Superior Academic Achievement: (1) Class Standing- upper third of the graduating class. (2) Grade-Point Average- 3.0 or higher out of a possible 4.0 as recorded on official transcript, or based on courses completed during final 2 years of curriculum; OR 3.5 or higher out of a possible 4.0 based on average of required courses completed in major, or required courses in major completed during the final 2 years of curriculum. (3) Honor Society Membership- election to membership in a national scholastic honor society.

You must meet all qualification requirements by the cut-off date to be considered.

How You Will Be Evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

If you meet the minimum qualifications requirements for this position, your application will be evaluated and rated under Category Rating selection procedures. Once the application process is complete, a review of your qualifications will be conducted to determine if you are qualified for this job. Qualified candidates will be assigned to a quality category. The quality categories are: Best Qualified, Well Qualified, or Qualified. Within each of these categories, applicants eligible for veteran's preference will receive selection priority over non-preference eligibles.

Please note that if, after reviewing your resume and or supporting documentation, a determination is made that you have inflated your qualifications and or experience, your category rating can and will be adjusted to more accurately reflect your abilities, or you may lose consideration for this position. Please follow all instructions carefully. Errors or omissions may affect your eligibility.

To determine if you are qualified for this position, a review of your resume and supporting documentation will be made and compared against the qualifications as defined in the qualifications section of this vacancy announcement and your responses to the assessment questions. You will be rated based on the information provided in your resume (your resume must state specific duties that relate to this position) and your responses to the assessment questions will be evaluated against the duties you provided in your resume, along with your submitted documentation to determine your ability to demonstrate the following.

• Oral Communication
• Planning and Evaluating
• Technical Competence

The following links below provide information on how you may be eligible for various hiring authorities. If you are a Veteran, qualified CTAP and ICTAP eligible, or an individual with a disability, please refer to the following links below for additional guidance. CTAP and ICTAP candidates will be eligible for selection priority if it is determined that they have exceeded the minimum qualifications for the position by attaining at least a "well qualified" rating of 85 out of 100. Information about CTAP and ICTAP eligibility is on the Office of Personnel Management's Workforce Restructuring Career Transition website at: . CTAP/ICTAP documentation requirements are listed in the "Required Documents" section of this announcement.

• Veterans, i.e. (VEOA, VRA, and 30% or more disabled) -
• Career Transition Assistance Program (CTAP) -
• Interagency Transition Assistance Program (ICTAP) -
• Schedule A Appointments for the Disabled -

Click here to view vacancy questions: . All documents above MUST be received by 11:59 pm (Eastern Standard Time) of the respective cut-off date for application review.

Required Documents

Resume: You are highly encouraged to use USAJOBS Resume Builder to ensure all required information is included in your Resume. If you use your own resume, curriculum vitae, or any other written form you choose then you must describe your job-related qualifications that includes beginning and ending dates for paid and non-paid work experience, hours worked per week, month and year of employment for each job title listed, annual salary, and description of job duties. Include name and address of employer; supervisor name and telephone number.

Required as applicable for the purposes of specific eligibility and appointment claim(s), and position requirements:
Indian Preference Applicants: If claiming Indian preference, applicants must provide a completed copy of the Form BIA-4432, "Verification of Indian Preference for Employment in the BIA and IHS Only." Indian preference will not be given unless a properly signed and dated form is submitted with your application, including any verification by an authorized Tribal Representative or BIA Official of tribal enrollment records. For detailed instructions, see form BIA-4432. Refer to BIA-4432 link: . When an Indian Preference candidate possesses Veterans preference the rules regarding Veterans preference apply under ESEP and the applicant must provide documentation in order to receive preference.
Veterans Preference: If claiming Veteran's Preference provide a copy of your DD214 Form (Member 4 copy). To claim 10-Point Veterans Preference, submit a SF-15 Application () along with the appropriate supporting documentation. For additional information regarding Veterans Preference visit: .
Career Transition Assistance Program (CTAP)/Interagency Career Transition Assistance Program (ICTAP): If you are claiming CTAP/ICTAP, follow the instructions below: .
Transcripts: You are encouraged to submit copies of transcripts (official or unofficial) although not required at the time of application. You must list your courses including titles, credit hours completed, and grades. Official transcripts will be required after tentative selection and prior to issuing an official job offer.
Licensure, Certifications: Applicants should list their license/certifications on their resume, along with the expiration date, if applicable. Certification of licensure/certification will be required after tentative selection and prior to issuing an official job offer.
Superior Academic Achievement: If claiming eligibility for Superior Academic Achievement, candidates must provide copies of transcripts (official or unofficial) must be included at the time of initial application. If unable to obtain transcripts, candidates must provide sufficient evidence to validate courses completed and credit hours earned. Eligibility is based on one of the following:

1. Class standing - Applicants must be in the upper third of the graduating class in the college, university, or major subdivision and based on completed courses.
2. Grade-point average (G.P.A.) - Applicants must have a G.P.A. of: a.) 3.0 or higher out of a possible 4.0 (''B" or better) as recorded on their official transcript, or as computed based on 4 years of education, or as computed based on courses completed during the final 2 years of the curriculum; or b.) 3.5 or higher out of a possible 4.0 ("B+" or better) based on the average of the required courses completed in the major field or the required courses in the major field completed during the final 2 years of the curriculum.
3. Election to membership in a national scholastic honor society - Applicants can be considered eligible based on membership in one of the national scholastic honor societies listed here Association of College Honor Societies. Official transcripts may be required after tentative selection and prior to issuing an official job offer.

This announcement is advertised as Open Until Filled. Applications should be submitted ASAP to ensure you will be considered for this position. The first "cut-off" for review of applications will be 10 working days from the opening date, which is 10/10/2024, and every 10 working days thereafter unless the position has already been filled before the next cut-off date.

You must meet the requirements of the job by 11:59 (Eastern Standard Time) of the respective cut-off date for application review.

Your resume and any documents submitted will be retained for eight months and may be used at any time during this period. After 8 months, you must reapply to this announcement in order to be considered.

PDN-9d1b59d4-a5d3-4e67-885e-e0f785b3e1be