Summary
This position serves as a General Engineer who supports the operation of the health care facilities within the Pine Ridge Service Unit Facilities Department in Pine Ridge, SD. The incumbent coordinates planning, project development, construction and equipping of new and existing facilities being built, renovated and repaired. The position reports to the Supervisory General Engineer.
Duties
- Coordinates the implementation of a Computer-Aided Design program.
- Initiates drawings, specifications, on routine and moderately complex projects.
- Reviews testing or observational data and develops and advises on the scope of operation, modification, and repair of facilities.
- Visits service unit sites to obtain specified information on condition of existing structures.
- Develops engineering proposals, designs and statements of work for facilities to be modified or repaired.
- Provides engineering oversight of facility repair and/or construction projects and serves as Contract Officer's Representative for assigned contracts.
Requirements
Conditions of Employment
Selectee may be subject to a probationary period
U.S. Citizenship is required
Selective Service Registration is required for males born after 12/31/1959
Measles and Rubella immunization required for selectees born after 1957 and seasonal influenza immunization is required for all staff working in Indian Health Service health care facilities.
COVID-19 vaccination is required for all selectees prior to entrance on duty.
Successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit .
Background Investigation: If you are selected for this vacancy, you must undergo a pre-employment fingerprint check and background investigation. Fingerprint results and background investigation documentation must be cleared prior to hire. After you begin your employment, your continued employment is contingent upon the outcome of a complete background investigation as determined by the sensitivity level of your position. The investigation must find that you are suitable for Federal employment in your position. If you are found not suitable, you will be terminated after you begin work. If you make a false statement in any part of your application, you may not be hired; you may be fired after you begin work; or subject to possible criminal charges. You may be subject to a credit check as a part of the background investigation process.
Qualifications
To qualify for this position, your resume must state sufficient experience and/or education, to perform the duties of the specific position for which you are applying.Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; social). You will receive credit for all qualifying experience, including volunteer and part time experience. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
BASIC REQUIREMENT(S):
A. Degree: Engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. A combination of education and experience: -- college-level education, training, and/or technical experience as evidenced by one of the following:
- Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
- Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
- Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A above.
- Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)
In addition, to the Basic Requirements, you must also meet the Minimum Qualifications stated below-
MINIMUM QUALIFICATIONS:
Your resume must demonstrate the education and/or at least one (1) year of specialized experience equivalent to at least the GS-09 grade level in the Federal service obtained in either the private or public sector as described below:
GS-11: One year of specialized experience performing the following type of work: experience directly related to standard engineering practices, methods, and techniques to perform design work applicable to the design, construction, maintenance and repair of healthcare facilities; developing reports, engineering statements of work for facilities to be modified or repaired; and performing the full range of engineering duties concerned with the design, repair and operation of health care facilities, buildings and HVAC controls, utilities and related systems.
Or
A Ph.D. or equivalent doctoral degree in engineering or a related field or 3 full years of progressively higher level graduate education leading to a Ph.D. in engineering or a related field.
Or
A combination of graduate level education in engineering or a related field AND specialized experience that meets 100% of the qualification requirements for this position. Qualifying graduate education must be in excess of 36 semester hours.
You must meet all qualification requirements by the cut-off date to be considered.
How You Will Be Evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
Additional selections may be made for similar positions across the Department of Health and Human Services (HHS) within the local commuting area(s) of the location identified in this announcement. By applying, you agree to have your application shared with interested selecting official(s) at HHS. Clearance of CTAP/ICTAP will be applied for similar positions across HHS.
This position will be filled through the Office of Personnel Management's Direct Hire Authority. Category rating and Veterans' Preference will not be considered in evaluating applicants. For more information on Direct Hire Authority, please see . Your application (resume and supporting documentation) will be evaluated to determine if you meet the minimum qualifications required as listed on the announcement under qualification requirements. To be considered well qualified for the purposes of the Career Transition Assistance Program (CTAP) and the Interagency Career Transition Assistance Program (ICTAP), you must substantively exceed the basic qualifications and meet all eligibility, physical, medical, suitability, and any other requirements.
Click here to view vacancy questions: . All documents above MUST be received by 11:59 (Eastern Standard Time) of the respective cut-off date for application review.
Required Documents
Resume: You are highly encouraged to use USAJOBS Resume Builder to ensure all required information is included in your Resume. If you use your own resume, curriculum vitae, or any other written form you choose then you must describe your job-related qualifications that includes beginning and ending dates for paid and non-paid work experience, hours worked per week, month and year of employment for each job title listed, annual salary, and description of job duties. Include name and address of employer; supervisor name and telephone number.
Required as applicable for the purposes of specific eligibility and appointment claim(s), and position requirements:
Indian Preference Applicants: If claiming Indian preference, applicants must provide a completed copy of the Form BIA-4432, "Verification of Indian Preference for Employment in the BIA and IHS Only." Indian preference will not be given unless a properly signed and dated form is submitted with your application, including any verification by an authorized Tribal Representative or BIA Official of tribal enrollment records. For detailed instructions, see form BIA-4432. Refer to BIA-4432 link: . When an Indian Preference candidate possesses Veterans preference the rules regarding Veterans preference apply under ESEP and the applicant must provide documentation in order to receive preference.
Career Transition Assistance Program (CTAP)/Interagency Career Transition Assistance Program (ICTAP): If you are claiming CTAP/ICTAP, follow the instructions below: .
Transcripts: You are encouraged to submit copies of transcripts (official or unofficial) although not required at the time of application. You must list your courses including titles, credit hours completed, and grades. Official transcripts will be required after tentative selection and prior to issuing an official job offer.
Licensure, Certifications: Applicants should list their license/certifications on their resume, along with the expiration date, if applicable. Certification of licensure/certification will be required after tentative selection and prior to issuing an official job offer.
This announcement is advertised as Open Until Filled. Applications should be submitted ASAP to ensure you will be considered for this position. The first "cut-off" for review of applications will be 10 working days from the opening date, which is 10/10/2024, and every 10 working days thereafter unless the position has already been filled before the next cut-off date.
You must meet the requirements of the job by 11:59 pm (Eastern Standard Time) of the respective cut-off date for application review.
Your resume and any documents submitted will be retained for eight months and may be used at any time during this period. After 8 months, you must reapply to this announcement in order to be considered.
